# The Basics of Programmable Logic Controller (PLC) that You Never Learned

- Link: https://studyelectrical.com/2020/03/programmable-logic-controller-plc-basics.html
- Published: 2020-03-28T11:45:02+00:00
- Author: Tesla

Programmable Logic Controllers (PLCs) are also referred to as programmable controllers
in some places. They are widely used in commercial and industrial applications.

Basically, a PLC monitors inputs, makes decisions based on its program, and controls
outputs to automate a process or machine. This article will give you basic information
on the basic functions and configurations of PLCs.

![Actual PLC](https://studyelectrical.com/wp-content/uploads/2020/03/Actual-PLC.
jpg)

An actual PLC will look like this

## Basic PLC Working

A programmable logic controller (PLC) consist of the following parts

 1. Input modules or points
 2. Central Processing Unit (CPU)
 3. Output modules or points.
 4. Programming device
 5. Operator Interface device

![plc parts](https://studyelectrical.com/wp-content/uploads/2020/03/plc-parts.png)

plc parts

An** input module** accepts a variety of digital or analog signals from various 
field devices (sensors) and converts them into a logic signal. This logic signal
can be used by the CPU.

The **CPU** makes decisions and executes control instructions. It is completely 
based on program instructions in memory.

**Output modules** are used to convert control instructions from the CPU into a 
digital or analog signal. This signal can be used to control various field devices(
actuators).

A** programming device** is used to input the desired instructions to the PLC. These
instructions given to the PLC determine what the PLC will do for a specific input.

An **operator interface device** is also used. This allows process information to
be displayed and new control parameters to be entered.

### Example of PLC Application

In this example a PLC is used to start and stop a motor. Pushbuttons are used as
sensors are connected to the PLC inputs. A [motor starter](https://studyelectrical.com/2018/11/need-of-starter-in-dc-motors-simple.html)
is connected to the output of the PLC.

![Plc application start stop motor](https://studyelectrical.com/wp-content/uploads/
2020/03/Plc-application-start-stop-motor.png)

PLC application start stop motor

The pushbuttons can be used to start and stop a motor connected to a PLC through
a motor starter (actuator).

### Hard-Wired Control

Before the invention of PLCs, many of these control tasks were solved with contactor
or [relay](https://studyelectrical.com/2016/03/types-classification-of-electrical-relays.html)
controls. This is often referred to as hardwired control.

![hardwired control](https://studyelectrical.com/wp-content/uploads/2020/03/hard-
wired-control-1.png)

hardwired control

In hard wired control circuit diagrams had to be designed, electrical components
specified and installed, and wiring lists created. Electricians wire the components
necessary to perform a specific task.

If an error was made the wires had to be reconnected correctly. A change in function
or system expansion required extensive component changes and rewiring.

## Advantages of PLCs

The same, as well as more complex tasks, can be done with a PLC. Wiring between 
devices and relay contacts is done in the[ PLC program](https://studyelectrical.com/course/programmable-logic-controller-plc-basic-course).
Hard-wiring, though still required to connect field devices, is less intensive.

Modifying the application and correcting errors are easier to handle. It is easier
to create and change a program in a PLC than it is to wire and rewire a circuit.

Following are just a few of the advantages of PLCs:

 * Smaller physical size than hard-wire solutions.
 * Easier and faster to make changes.
 * PLCs have integrated diagnostics and override functions.
 * Diagnostics are centrally available.
 * Applications can be immediately documented.
 * Applications can be duplicated faster and less expensively

### Related posts:

 [ ⌊Selecting Industrial Automation Modules⌉How to Source Hard-to-Find Electronic Components for Legacy Automation Systems](https://studyelectrical.com/2025/12/how-to-source-hard-to-find-electronic-components-for-legacy-automation-systems.html)
[ ⌊How to Source Hard to Find Electronic Components for Legacy Automation Systems⌉Selecting Industrial Automation Modules: 5 Practical Tips for Reliable PLC Integrations](https://studyelectrical.com/2025/12/selecting-industrial-automation-modules-5-practical-tips-for-reliable-plc-integrations.html)