# Armature Reaction in DC Generator - Link: https://studyelectrical.com/2014/09/armature-reaction-in-dc-machines.html - Published: 2014-09-01T16:23:00+00:00 To understand the concept of armature reaction in DC generator, please go through the previous articles describing the [construction of a DC generator](https://studyelectrical.com/2014/06/construction-dc-motor-dc-motor-construction.html). The concept of armature reaction is well explained in this article. ### What is Armature Reaction? [Armature reaction occurs in dc motors](https://studyelectrical.com/2014/12/armature-reaction-in-dc-motors.html) and dc generators. There are two windings in a dc generator and a dc motor: 1. Field winding 2. Armature Winding. The purpose of field winding is to produce a magnetic field (called **main flux**) whereas the purpose of armature winding is to carry armature current. Although the armature winding is not provided for the purpose of producing a magnetic field, still the current in the armature winding also produces a magnetic flux ( called **armature flux**). The armature flux distorts and weakens the main flux and create problems for the proper operation of the dc machines. **The action of armature flux on the main flux is called armature reaction in a dc generator**. [[ (i) Generator is on no-load (ii) Generator on Load (iii) Superimposing Fluxes The phenomenon of armature reaction in a dc generator is shown in the figure below. For the sake of clarity, we are taking only one pole. **When the generator is on no-load (Figure i)**, a small current is flowing through the armature and therefore flux produced in the armature is very small and it does not affect the main **flux φ1** coming from the pole. **When the generator is loaded (Figure ii)**, high current start flowing through the armature conductors, thus a high **flux φ2 **is set up as shown in fig (ii). **By superimposing the fluxes φ1 and φ2 (Figure iii)**, we obtain the **resulting flux φ3** as shown in fig (iii). This is what happens to the flux under one pole under armature reaction in a dc generator.  From fig (iii) it is clear that _flux density at the trailing pole tip (point B) is increased while at the leading pole tip (point A) it is decreased._ **This unequal field distribution due to the armature reaction in dc generator produces the following two effects:** * **The main flux is distorted.** * **The main Flux is weakened.** _The weakening of flux due to armature reaction in a dc generator also depends on the position of the brushes_. For that, we need to understand the geometrical and magnetic neutral axes. ### Geometrical and Magnetic Neutral Axes The geometrical neutral axis and magnetic neutral axis should be clearly understood in order to get a clear idea of armature reaction in a dc generator. The **geometrical neutral axis (GNA)** is the axis that bisects the angle between the center line of adjacent poles. The **magnetic neutral axis (MNA)** is the axis drawn perpendicular to the mean direction of the flux passing through the center of the armature. No e.m.f. is produced in the armature conductors along this axis because then they cut no flux. When no current is there in the armature conductors, the MNA coincides with GNA. [[ Geometric Neutral Axis (GNA) and Magnetic Neutral Axis (MNA) ### Explanation of Armature Reaction The **armature reaction in a dc generator** is explained as below, Consider no current in armature conductors, then **MNA coincides with GNA**. Now, when current start flowing through the armature conductors, due to the combined action of main flux and armature flux the **MNA get shifted from GNA**. In case of a generator, the M.N.A. is shifted in the direction of rotation of the machine. In order to achieve **sparkless commutation**, the brushes should be moved along the new MNA.  Under such a condition, the** armature reaction in a dc generator** produces the following two effects: * **_It demagnetizes or weakens the main flux._** * **_It cross-magnetizes or distorts the main flux._** Let us discuss these effects of **armature reaction in a dc generator** by considering a **2-pole generator** (though the following remarks also hold good for a multipolar generator).  [[ (i)flux due to main poles (main flux) (ii) flux due to the current flowing in armature conductors alone (iii)flux due to the main poles and that due to the current in armature conductors acting together **Fig (i) shows the flux due to main poles (main flux) when the armature conductors carry no current.** The flux across the air gap is uniform. The m.m.f. producing the main flux is represented in magnitude and direction by the vector OF_(m) in fig (i). Note that OF_(m) is  perpendicular to GNA. **Fig (ii) shows the flux due to the current flowing in armature conductors of dc generator alone (main poles unexcited)**. The armature conductors to the left of GNA. carry current “in” (×) and those to the right carry current “out” (•). The direction of magnetic lines of force can be found by corkscrew rule. It is clear that armature flux is directed downward parallel to the brush axis. The m.m.f. producing the armature flux is represented in magnitude and direction by the vector OF_(A) in fig (ii). **Fig (iii) shows the flux due to the main poles and that due to the current in armature conductors acting together.** The resultant m.m.f. OF is the vector sum of OF_(m) and OF_(A) as shown in fig (iii). Since MNA is always perpendicular to the resultant m.m.f., the MNA is shifted through an angle θ. Note that MNA is shifted in the direction of rotation of the generator. **In order to achieve sparkless commutation**, the brushes must lie along the MNA. Consequently, **the brushes are shifted through an angle θ** so as to lie along the new MNA as shown in **Fig (iv)**. Due to the brush shift, the m.m.f. F_(A)  of the armature is also rotated through the same angle θ. It is because some of the conductors which were earlier under N-pole now come under S-pole and vice-versa. The result is that armature m.m.f. F_(A) will no longer be vertically downward but will be rotated in the direction of rotation through an angle θ as shown in Fig ( iv). Now **F_(A) can be resolved into rectangular components F_(c) and F_(d).** The component F_(d) is in direct opposition to the m.m.f. OF_(m) due to main poles. It has a demagnetizing effect on the flux due to main poles. For this reason, it is called the **demagnetizing or weakening component** of armature reaction in dc machines. The component F_(c) is at right angles to the m.m.f. OF_(m) due to main poles. It distorts the main field. For this reason, it is called the **cross magnetizing or distorting component **of armature reaction in dc machines. _It may be noted that with the increase of armature current, both demagnetizing and distorting effects will increase. ### Related posts: No related posts.