# Three Phase Induction Motors – Construction

- Link: https://studyelectrical.com/2013/11/three-phase-induction-motors.html
- Published: 2013-11-07T05:34:00+00:00

A three phase induction motor has two main parts

 1. stator 
 2.  rotor.

The rotor is separated from the stator by a small air-gap which ranges from 0.4 
mm to 4 mm, depending on the power of the motor.

![electric motor](https://4.bp.blogspot.com/-bH4GToIBZAM/U1eH2ajA76I/AAAAAAAAAv0/
kVl6j9i0nX8/s1600/electric_motor.jpg)

Construction of Three Phase Induction Motor

## Stator of Three Phase Induction Motor

It consists of a steel frame which encloses a hollow, cylindrical core made up of
thin laminations of silicon steel to reduce hysteresis and eddy current losses.

A number of evenly spaced slots are provided on the inner periphery of the laminations.
The insulated connected to form a balanced 3-phase star or delta connected circuit.

The three-phase stator winding is wound for a definite number of poles as per the
requirement of speed. Greater the number of poles, lesser is the speed of the motor
and vice-versa.

When three phase supply is given to the stator winding, a [rotating magnetic field](https://studyelectrical.com/2014/01/production-of-rotating-magnetic-field.html)
of constant magnitude is produced. This rotating field induces currents in the rotor
by electromagnetic induction.

## Rotor of Three Phase Induction Motor

The rotor of three phase induction motor is mounted on a shaft. It is a hollow laminated
core having slots on its outer periphery.

The winding placed in these slots (called rotor winding) may be one of the following
two types:

 1. Squirrel cage type Rotor
 2. Wound type Rotor

### Squirrel cage rotor

It consists of a laminated cylindrical core having parallel slots on its outer periphery.
One copper or aluminum bar is placed in each slot. All these bars are joined at 
each end by metal rings called end rings. 

This forms a permanently short-circuited winding which is indestructible. The entire
construction (bars and end rings) resembles a squirrel cage and hence the name.

The rotor is not connected electrically to the supply but has current induced in
it by transformer action from the stator. Those induction motors which employ squirrel
cage rotor are called squirrel cage induction motors.

Most of three phase induction motor use squirrel cage rotor as it has a remarkably
simple and robust construction enabling it to operate in the most adverse circumstances.

However, it suffers from the disadvantage of a low starting torque. It is because
the rotor bars are permanently short-circuited and it is not possible to add any
external resistance to the rotor circuit to have a large starting torque.

### Wound rotor

It consists of a laminated cylindrical core and carries a 3-phase winding, similar
to the one on the stator. The rotor winding is uniformly distributed in the slots
and is usually star-connected.

The open ends of the rotor winding are brought out and joined to three insulated
slip rings mounted on the rotor shaft with one brush resting on each slip ring.

The three brushes are connected to a three phase star-connected rheostat. At starting,
the external resistances are included in the rotor circuit to give a large starting
torque.

These resistances are gradually reduced to zero as the motor runs up to speed. The
external resistances are used during starting period only. When the motor attains
normal speed, the three brushes are short-circuited so that the wound rotor runs
like a squirrel cage rotor.

Next: [Working of Three Phase Induction Motor](https://studyelectrical.com/2014/11/how-three-phase-induction-motor-work.html)

### Related posts:

No related posts.